Immediate Uses

• Enable Remote Desktop (RDP) if you forgot to do it when you built the system.
• Enable Remote Desktop (RDP) if your working re motley and cant access the server.
• Change the port number Remote Desktop (RDP) listens on.
• Will add users to the "Remote Desktop Users" group on the target system

Instructions

• Open the utility up and type the server name (You can also enter an IP) of the system you want to enable RDP on and click "OK"
• Also if you want to change the port number RDP listens on check the "Change RDP Port Number" check box.
• If you checked the "Change RDP Port Number" checkbox then enter the new port# and click "OK".
• If you want to add a user to the Remote Desktop Users group then enter the server or ip address. Enter the user name using the "user@domain" format. Click the "Add" button.

**Please remember you must be a "local admin" or a member of the "local admins" group on the system you are running the tools from.

Donations

I spend a lot of late nights building this site up and if it helps you or makes your job a little easier please think about making a donation to support it. Remember any donation small or large, 50 cents to 50 dollars is greatly appreciated.